Thursday, November 10, 2005

This shows how to create Partitions using Norton Patrition Magic

Ok dude i am a person who performs this type of job at least
twice in a month(both 4 me and my friends).But please don't
blame me if anything goes wrong(The Disclaimer HUH).Well here
are the steps.

1.As suggested by hrishi2das You need a third party utility
like Norton partition Magic.But if u need it only for
partitioning ur HD then the boot image will just work fine.It
is a 2.87 MB of download.

  • Link1.
  • Link2.

    if clicking on the links didn't download the file then copy paste the link in the address bar of your browser.That should work

    2.After downloading the Zip file extract the ISO disk image
    from it and burn it on a CD(prferably WR CD if u don't want
    to loose a cd by just writing 2.87 mb to it.LOL)

    3.Now Pop that CD into your CD drive and reboot your
    system.The System will boot from the cd rom if it don't boot
    from the cd change the BIOS option and set the primary boot
    device as CD-ROM(this option is found under the advance bios
    setup in case of award BIOSes).Now the Norton partition magic
    GUI will open.

    4.As u said You have windows XP preloaded.Depending on the
    type of file system Partition magic will show you the disk
    information.if win xp was installed in ur system using the
    default NTFS file system you will get some thing like this in
    your screen.

    5.Now u say u want 3 partitions of 20GB each.For that delete
    the existing partition by clicking the "Delete Partition"
    button(or else Operations->Delete...).It will come up with a
    confirmation dialog type "OK" and press "Enter".This will
    show the dialog "This is a active ...." click ok again(or
    press "Enter")

    6.Now lets create partitions(This is the largest step).As u
    said u have a 60GB HD.It is 60*1024=61440MB.Dividing it into
    three equal partsgives the result 20480MB.OK too much of
    maths.Now click on the "Create Partition Button"(or
    Operations->create...).Now the create partition dialog box
    will open.Fill up the parameters as given below.

    Create As-------------Primary Partition
    Partition Type--------NTFS(If u only want to install XP if
    planning to keep win98 also choose FAT)
    Label-----------------Anything you wish May be blank also
    Size------------------20481.3 (i.e. 20 GB)
    Cluster Size----------Default
    NTFS Version----------(3.1)Windows XP
    Now click OK.Now you will see something like this.

    Now Click on unallocated and repet the same procedure above except
    Create As-------------Logical Partition

    Click OK.Now you will see something like this.

    Repet the same for the rest unallocated spaces.and finally u
    will c something like this.

    Click on the "Apply" Button.It
    will come up with a dialog saying "n operations are currently
    pending.Apply changes now?"(n is any intezer generally less than 5 or 6)Click "Yes"(Obviously).

    It will start processing as shown below.

    and after all operations Completed successfully click "OK".Now Click "Exit".Most
    Probably it will prompt for restarting.Clicking on
    "Details>>" will show details that why should you restart
    your pc.however Click "OK" to restart your PC.

    Now if you still have the partition magic CD then it wil show you the
    1 NTFS primary,2 NTFS Logical and 1 Extended Partition

    7.Now you have your desired partitions.Take out the Partition
    magic CD and put a bootable Windows XP cd.I insist on using
    original Windows Software(No neither i am bill gates bhatijaa
    chill gates nor even i own an original Win Xp but what's the
    harm in giving an advice LOL).When u see this page

    I suggest you to format the drives(all the three one primary and other
    logical) using NTFS file system(Quick).For example to format
    the 'C' drive or partition1 Press enter while it is in
    focus.then in the next page select "Format partition using
    NTFS file system(quick)" and press enter.Then Press 'F' to
    format.From now onwards i assume that u know how to install
    Windows XP.Have a nice day(Gr8 song by Bon jovi must listin LOL)
  • How to create a Multiboot CD using EasyBoot

    Before I continue please let me tell you please neither laugh am me if you knew if before(and also for my bad english LOL),there may be people who still don't know, nor blame me for any damage that is (if)caused by this procedure.(The disclaimer HUH).OK too much of nonsense talk now let's start.

    Ok guys have you ever seen a cd that shows a boot menu so that you can choose from a list of available bootable items.Confused have a look below.

    Liked it??!(if no don't read LOL).OK here are the tools we will be needing to create such a thing.

  • 1. Easy Boot (Crack)
  • 2. UltraISO (Crack)
  • 3. Norton Boot Disk
  • Link2.

    if clicking on the links didn't download the file then copy paste the link in the address bar of your browser.That should work.

    However putting Norton Partition Magic 8 is purely optional

    Now here are the steps.

    1.Install EasyBoot(and the crack if u don't want the "Created By EasyBoot 5.0. . . etc" appear on your tedious output).At the first run you will get a screen like below

    But continuing ahead i suggest you to read the "Userguide" section of the easyboot help.

    2.Now create a logo picture for your bootable.This picture will bw shown as a splash screen before the boot menu appears.(But befor that close easyboot.)Make a 256 color bitmap image(bmp) this is the only supported image format.Now design a background image for the boot menu Also make it 256 color bitmap image.Now navigate to the easybot program files directory here you will find a directory named "disk1" opening it yopu will find another directory named "ezboot".Now open this directory and put the image files in this directory.for convenience i named the logo file as "logo.bmp" and the background image file as "BACK.bmp".There will be two file with these names these are the default logo and backgroung file provided along with the software.Now opening easyboot will show you something like this

    Now if you click the "Make ISO" button then it wil make a bootable CD image that will show you this boot screen if the system boots from that disk.

    3.In this step we will discuss how to put norton partition magic in this bootable CD.ok download the norton partition magic 8 bootable image from the links provided above.It is a 2.87MB of bootable sector wise boot image of Norton Partition magic CD.Now open it using UltraISO after extracting it from the ZIP file.Now click Bootable->Save boot file.

    Now for ease of working navigate to the "..\EasyBoot\disk1\ezboot" directory and save it.For convenience i have given it name "pm.bif".This will save the boot information present in the Partition Magic Bootable disc image into a .bif file.

    4.Now in Easyboot create another menu for Norton Partition Magic(read the help file provided with the sw to know how to create menu.But if you don't want to read it just remember R-Click on an existing menu when it is in focus or selected in the preview window will create a neew menu,L-click will let you pick it up so that you can drag it anywhere in the screen,L-click again will put it at that position and allow you to resize it.R-Clicl again will release the mouse.).Now clcil on the menu tab and write "run pm.bif" in the "Command" field.Have a look below.

    5.Now under the file tab click "Save" then "Make ISO" give proper path(i.e. the path where you want your ISO bootable cd image to be saved by default it is "C:\EasyBoot\iso").Look Image below.

    6. This is the final step in this step we will create the final multiboot working disk image.In this case i have saved the bootable disk image as "Test.iso" in "I:\Temp" directory(whatever who cares).Open the file "Test.ISO" in UltraISO.Now if you have two optical drives then you can create the final CD image faster.However we will assume that you have only one(everybody is not lucky enough like me he he LOL).Put Windows XP CD in your CD/DVD drive.Now select all and drag and drop it into the UltraISO window(that has the "Test.ISO" file opened in it).It will start adding the files from the cd to the CD Image you are creating.

    After it finishes adding the files.Click save or File->Save(or CTRL+S).it will start saving the disc image and show you a dialog with progress bar elapsed tme remaining time etc like shown below.

    Now take out the Windows XP CD and put the Windows 98 CD.Now add only the directory named "win98" to the current compilation and click again.Your final compilation will look like below.

    7.Well now you are done.You have a multiboot disk image.If you wish you can try it using the Microsoft Virtual PC or VMware Workstation.Now get a good quality blank 700MB CD and burn the image onto it.(For burning the CD image open it using Nero Burning Rom and burn it from there.You can also use UlrtaISO to burn the image to a CD But I think Nero is better.)Restart Your computer with this CD in your CD rom Drive.The PC will boot from it.Loking nice.Bye.

    Wednesday, November 09, 2005

    Manually editing the Windows XP boot screen

    Ok guys Goto the tutorial
    I prefer to wtire a tutorial using Tripod.Lycos free web hosting feature because that way i can use frames.